Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen der Seite angezeigt.

--- argononelibreelec [2022/04/26 00:32] – noone
+++ argononelibreelec [2023/02/08 22:56] (aktuell) – noone
@@ Zeile 9: / Zeile 9: @@
 Folgende Anpassungen sind erforderlich:
-* im File /storage/.config/system.d/argononed.service muss die ExecStart Zeile geändert werden
+  * im File /storage/.config/system.d/argononed.service muss die ExecStart Zeile geändert werden
    ExecStart=/bin/sh -c ". /etc/profile; exec /usr/bin/python /storage/.config/argononed.py"
-* anschliessend ggf. die Datei /storage/argononed.config anpassen
-* danach muss der Dienst neu eingelesen werden
+  * anschliessend ggf. die Datei /storage/argononed.config anpassen
+  * danach muss der Dienst neu eingelesen werden
    systemctl reload daemon
-* endlich kann der Dienst neu gestartet werden
+  * endlich kann der Dienst neu gestartet werden
    systemctl restart argononed.service
+If you are interested: Full remote control for LibreElec with Argon One V2 Case - the "not so professional" way!
+I have 1 Argon One M.2, 1 Raspberry Pi 4B and and 2 ONE4ALL URC-6430 (afterwards I need just only one!)
+. Installed Libreelec (e.g. with balena etcher on a USB-Stick or microSSD)
+. SSH enabled?
+. Installed Addon "Script - System Tools"
+. Connected (ssh) from PC to libreelec box
+. Edited config.txt
+LibreELEC: ~ # mount -o remount,rw /flash
+LibreELEC: ~ # mcedit /flash/config.txt
+Code: /flash/config.txt
+dtoverlay=gpio-ir,gpio_pin=23
+LibreELEC: ~ # reboot
+. Found some scan codes
+LibreELEC: ~ # ir-keytable -p nec -t
+Now I had to program my remote. I have two identical "One4All URC 6430" but it should be ok with other learning remotes too. Searching for a PVR or Mulimedia Device to get as much as possible functional keys, the best ones I found, were DVICO (2153) and Digitech (2260) in the code list of my "URC 6430".
+table: ONE4ALL URC 6430 : VIDAC (2153) - Digitech (2260)
+The best match for me was the DVICO. Some key did not give any scan code. So I used the second remote to find any functional keys. Then copied the keys from the second remote to the functionless keys of my first remote.
+. Created my /storage/.config/rc_keymaps/custom_remote
+Code: /storage/.config/rc_keymaps/custom_remote
+# table custom_remote, type: NEC
+x4cb02 KEY_POWER
+x4cb41 KEY_RED
+x4cb03 KEY_GREEN
+x4cb42 KEY_YELLOW
+x4cb45 KEY_BLUE
+x73960000 KEY_EPG
+x6a960000 KEY_HOME
+x67960000 KEY_INFO
+x21960000 KEY_CHANNELUP
+x19960000 KEY_CHANNELDOWN
+x4cb07 KEY_BACK
+x4cb46 KEY_BACKSPACE
+x15960000 KEY_VOLUMEDOWN
+x25960000 KEY_VOLUMEUP
+x5e960000 KEY_MUTE
+x4cb4c KEY_STOP
+x4cb55 KEY_CONTEXT_MENU
+x4cb50 KEY_UP
+x6f960000 KEY_RIGHT
+x63960000 KEY_DOWN
+x6b960000 KEY_LEFT
+x6e960000 KEY_OK
+x31960000 KEY_RECORD
+x1f960000 KEY_REWIND
+x4cb17 KEY_PLAY
+x22960000 KEY_FORWARD
+x4cb56 KEY_PLAYPAUSE
+x1b960000 KEY_1
+x27960000 KEY_2
+x2b960000 KEY_3
+x17960000 KEY_4
+x60960000 KEY_5
+x64960000 KEY_6
+x58960000 KEY_7
+x5c960000 KEY_8
+x68960000 KEY_9
+x13960000 KEY_0
+x2f960000 KEY_SUBTITLE
+x4cb1b KEY_TEXT
+Alles anzeigen
+. Pointed to it
+Code: /storage/.config/rc_maps.cfg
+* * custom_remote
+. Now tested, if it works:
+I opend two remote terminals (to watch scancode and mapped keys simultaneously)
+No.1 for
+LibreELEC: ~ # ir-keytable -c -w /storage/.config/rc_keymaps/custom_remote
+No.2 for
+LibreELEC: ~ # irw
+. Rebooted, and ...
+. I didn't get the powerbutton script working with LibreElec. So i had to flash another USB-Stick with a Raspberry OS Lite to program my power key. If you manage to run the script, you have to do this before starting with this "tutorial". Installing the OS on the Raspberry and configuring the power button is not a big deal.
+I hope this may be usefull for someone and sorry for the bad english, the bad layout and the many errors!
+Usefull links:
+https://wiki.libreelec.tv/configuration/ir-remotes
+http://wagnerstechtalk.com/argonone/#Install_Argon_ONE_Scripts_in_Pi_OS_3264-bit